LSIS XP Series Troubleshooting Manual

2. Troubleshooting
32
2.3 Troubleshooting when fault occurs
2.3.1 Booting Problem
XGT Panel may have booting problems after power supplied
In this case, please check the wire status of power supply and whether the power supply works normally
If there’s no problem with the power supply, please refer to following content to troubleshoot.
Fault phenomenon
Cause
Resolution
(1) Screen do not turn on after power supplied
XGT Panel does not set to booting mode
Set the dip
switches(refer to
following content)
H/W fault
Please contact
the nearest
service office
(2) Stop at Windows CE loading page
Windows OS file is damaged
Please contact
the nearest
service office
(3) XGT Panel cannot turn to main menu page
(Stop at Windows CE page)
Startup file is damaged or deleted
‘Startup’ file
recover(refer to
following content)

LSIS XP Series Specifications

General

Brand	LSIS
Model	XP Series
Category	Touch Panel
Language	English