LSIS XP Series Troubleshooting Manual

3. Maintenance
38
3
Maintenance
To keep the XGT Panel best, examine the XGT Panel.
3.1 Maintenance
Because an error may be developed by environment, the periodic maintenance is needed. You should check
the following categories once or twice every 6 months.
Maintenance category
Judgment standard
Measure
Power
Within the power change
range
(Within -15% / +10%)
Modify the source of electric power in order to be
in the fluctuation range of a permissible
voltage.
Environment
Operating
temperature
0 ~ + 50℃
Modify the operating temperature and humidity to
be proper.
Operating
humidity
10 ~ 85%RH
Vibration
No vibration
Use the anti-vibration rubber and make a count
measure.
Getting loose of power
terminal
There is no unwinding
Screw the unwound terminal.
Getting loose of
communication
connector
There is no unwinding
Screw the unwound terminal.
Reserved part
Amount of reserved part
and
reservation
Check the status
Refill the insufficiency and improve the
reservation.
3.2 Daily Maintenance
Check the following daily..
Maintenance
category
Maintenance contents
Judgment standard
Measure
Status of panel
adhesion
Check the unwound screw
of the bracket
Fixed firmly
Wind the screw
Getting loose of power
terminal
Getting loose of power
terminal screw
There is no unwinding
Wind the screw
Reduce the distance
between compressed
terminals.
Keep the proper distance.
Correction
Status of
communication
connector
Unwinding of fixed screw
There is no unwinding
Wind the screw

LSIS XP Series Specifications

General

Brand	LSIS
Model	XP Series
Category	Touch Panel
Language	English