E-mail: support@lslidar.com Phone: 0086-0755-23242821 Website: www. lslidar.com Linkedin: LeiShen Intelligent System
22
7.1.3 Menu Function Introduction
(1) Click the icon Select the Start button to start receiving the display data.
(2) Click the coordinate axis button to control whether to display the coordinate axis of origin position.
(3) Click button to control Yes/No to display the measuring grid.
(4) Click button to controls whether to show/hide the left data bar
(5) Click the clean button to clear the screen display.
(6) Select the view button to correspond to the top view, front view and left view respectively. Set the viewing angle to view the
point cloud image from the top, front, and left.
(7) Choose different types of point clouds to display by reflectivity, horizontal angle and single color.
(8) Click the icon to pop up LiDAR parameter setting form
。
(9) Click the button to save the 3D data of the point cloud.
To Next Page
Loading...