N10 PLUS
9
spatial x, y, and z coordinates. Azimuth indicates the azimuth angle, Distance
indicates the distance between the lidar and the measured target, Intensity
indicates the reflection intensity of the measured target, Laser_id indicates
which laser channel, and timestamp indicates the time.
Figure 5.2 Real-time Point Cloud Image
5.1.3 Menu Function Description
▉ Introduction to Point Cloud Display
The point cloud display interface supports the following actions:
1) Scroll the mouse wheel to zoom in/out the display image; you can also hold
the right mouse button and drag the image up/down to zoom in/out the
display image.
2) Hold the left mouse button and drag the display image to adjust the viewing
angle.
3) Hold the mouse wheel and drag the image to move the display image; you
can also hold both the shift key on the keyboard and the left mouse button
to move the display image.
▉ Introduction to Menu Bar Buttons
⚫ Lidar Menu
Table 5.1 Lidar Menu Button Description
To Next Page
Loading...