LSLIDAR N10 PLUS - Product Specifications; Grid Map Presentation; Technical Specifications

N10 PLUS
2
1.2.2 Grid Map Presentation
You can get the 2D grid map information of the surrounds across 360° within
the detecting distance, based on the combination of the distance value
calculated in real-time by the signal processing unit embedded in the N10 PLUS
and the angle information output by the highly accurate self-adjusted angle
measuring module.
Figure 1.2 Demonstration of Ranging Function
*Note: The figures only demonstrate the function of the distance measuring
system. They are not proportional.
1.3 Specifications
Table 1.1 Specifications of N10 PLUS
Model
N10 PLUS
Wavelength
905 nm
Laser Safety Level
CLASS I
scanning angle
360°
PRF
5.4 KHz
Angular Resolution
0.4°~0.8°
Scanning Rate
6 Hz ~ 12 Hz
Measurement
Accuracy
3 cm @70%
Detection Range
0.02 m ~ 15 m @70%
Data Content
Azimuth, Distance, Intensity
Network Power
Supply
5 VDC 4.75 V ~ 5.25 V
Operating
Temperature
-10 ~ 40
Storage Temperature
-30 ~70
Maximum Acceptable
Ambient Light
Intensity
80K Lux