N10 PLUS
14
Storage
The storage temperature of N10 PLUS series products is -30°C ~ 70°C. It is
recommended to store the products in a ventilated and dry place where the
temperature is 23±5°C, and the relative humidity is 30% ~ 70%. Do not store in
environments where humidity, pH, etc. exceed the protection level.
Cleaning
When using the lidar, if the optical window is polluted by fingerprints, mud,
leaves, insect corpses, etc., it will affect the lidar ranging effect. Please follow
the following steps for cleaning.
Tools: PVC gloves, dust-free cloth, anhydrous ethanol (99%)
Environment: ventilated and dry, away from fire sources
1) Wear the PVC gloves and secure the lidar base with your fingers; For a stain
that is not stubborn, use a dust-free cloth to gently wipe it off or dry air to
blow it off.
2) For a stubborn stain, fill the spray bottle with ethanol, spray evenly on the
stain, wait for a while until the stain is dissolved, and then use a dust-free
cloth dipped in ethanol to gently wipe the optical window. If the dust-free
cloth is polluted, replace it immediately. After cleaning off the stain, use a
new dust-free cloth to wipe off the remaining liquid.
To Next Page
Loading...