LTS LTD8424T-FA - Recording

Quick Start Guide of Digital Video Recorder
22
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the button on the toolbar to start the live view of all cameras on the device list.
Refer to the following table for the description of buttons on the live view window:
Icon
Description
Select the window-division mode
/
Start/Stop all live view
Capture pictures in the live view mode
/
Start/Stop all recording
Previous page
Next page
/
Open/Close audio
/
Start/Stop two-way Audio
Adjust volume
/
Enable/Disable digital zoom
Recording
Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Steps:
1. Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settings
interface.
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Schedule to enable recording schedule.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com