User Manual of Network Video Recorder
25
Figure 2. 6 Network Setting
Two self-adaptive 10M/100M/1000M network interfaces provided for LTN89XX series, and two working modes
are configurable: multi-address and network fault tolerance,. And 1 self-adaptive 10M/100M/1000M network
interface for LTN89XX-P series.
4. Click Next button after you configured the basic network parameters. Then you will enter the PT Cloud
interface. Configure the PT Cloud according to your need.
Figure 2. 7 Advanced Network Parameters
5. Click Next button after you configured the basic network parameters. Then you will enter the Advanced
Network Parameter interface. You can enable UPnP, DDNS and set other ports according to your need.
To Next Page
Loading...
