User Manual of Network Video Recorder
26
Figure 2. 8 Advanced Network Parameters
6. Click Next button after you configured the network parameters, which takes you to the HDD Management
window, shown in Figure 2. 9.
Figure 2. 9 HDD Management
7. To initialize the HDD, click the Init button. Initialization removes all the data saved in the HDD.
8. Click Next button. You enter the Adding IP Camera interface.
9. Click Search to search the online IP Camera and the Security status shows whether it is active or inactive.
Before adding the camera, make sure the IP camera to be added is in active status.
If the camera is in inactive status, you can click the inactive icon of the camera to set the password to
activate it. You can also select multiple cameras from the list and click the One-touch Activate to activate
the cameras in batch.
Click the Add to add the camera.
To Next Page
Loading...
