User Manual of 89XX-R Series NVR
189
15.3 Configuring More Settings
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Click the More Settings tab to enter the More Settings interface.
Figure 15. 3 More Settings Interface
3. Configure the following settings:
•
Device Name: Edit the name of NVR.
•
Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255, and the
default No. is 255. The number is used for the remote and keyboard control.
•
Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5 Minutes, then
the system will exit from the current operation menu to live view screen after 5 minutes of menu
inactivity.
•
Menu Output Mode: You can choose the menu display on different video output.
you can select the menu output mode to VGA, HDMI or Auto. When the Auto option is selected and
both HDMI and VGA outputs are connected, the device will detect and set the HDMI as the menu
output.
4. Click the Apply button to save the settings.
To Next Page
Loading...
