Installation
40
4 Pull the carrier to the right to
remove it.
5 a. Slide the top module to the left
to disengage its interlocking
mounting tracks from the
PARTNER ACS processor
module.
b. If you are replacing the
PARTNER ACS processor
module, skip to Step 7. If you
are replacing the top module,
continue with Step 6.
6 Mount the new module by
following Steps 3 through 8 in
“Wall-Mounting a 2-Slot Carrier
and Modules”, earlier in this
guide, and then skip to Step 8.
To Next Page
Loading...
