Feature Reference
5-12
Valid Entries
Up to 12 digits including 0–9, #, *, and h (any single digit)
Examples
The examples below show how you would enter telephone numbers for an
Allowed Phone Number List in Step 4 of “Programming.” When an Allowed List is
assigned to an extension, users can dial numbers on that list, even if the numbers
would otherwise be restricted.
■ Specific Telephone Numbers. Enter the phone number exactly as you
would dial it. For example, to allow calls to the number 201 555-1111, make
the following entries:
— Toll Call Prefix required
— 12015551111
— Toll Call Prefix not required
— 2015551111
■ All Telephone Numbers in One Area Code. The following list entries
allow calls to the 800 area code:
— Toll Call Prefix required
— 1800
— Toll Call Prefix not required
— 800
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To create a list of Allowed Phone Numbers:
1. Press
f 0 0 s s # 4 0 7 at extension
10 or 11.
2. At the
List Number:
prompt, enter a list number (1–8). For example, to
select the first list, press
1.
3. At the
Entry:
prompt, select a list entry (01–10). For example, to select
the first entry, press
0 1.
4. At the
Data
- - - - - - - - - - - - prompt, enter the first telephone number.
5. To save the telephone number in memory, you must press
e.
To Next Page
Loading...
Need help?
General
