Feature Reference
5-96
Copy Settings (#399)
Description
This System Programming procedure copies all of the following settings from one
extension to another:
Considerations
â– This procedure is skipped in the sequence of programming procedures
when cycling. To use this procedure, enter the code (#399) directly.
â– For each type of phone, program one extension, then use this procedure to
copy the programming from that extension to the others with the same
number of line or pool buttons (for example, from a PARTNER-18D phone
to a PARTNER-18 phone).
â– Pooled extension settings can be copied to key extensions, except for
extension 10. Key extension settings can be copied to pooled extensions.
#116 Call Coverage Rings
1
1. For Release 2.0 only
#317 Caller ID Call Logging and Dialing
2
2. For Release 2.0 and later
#117 VMS Cover Rings
3
3. For Release 2.0 and earlier
#318 Caller ID Log Answered Calls
#301 Line Assignment #320 Call Coverage Rings
4
4. For Release 3.0 and later
#302 Line Access Restriction #321 VMS Cover Rings
4
#303 Display Language #401 Outgoing Call Restriction
#304 Automatic Extension Privacy #405 Disallowed List Assignments
#305 Abbreviated Ringing #408 Allowed List Assignments
#307 Forced Account Code Entry #501 Pickup Group Extensions
#308 Distinctive Ring #502 Calling Group Extensions
#309 Intercom Dial Tone #504 Night Service Group
#310 Automatic VMS Cover #505 Hunt Group Extensions
#311 External Hotline #601 Fax Machine Extensions
#312 Voice Interrupt On Busy Automatic #607 AA Extensions
#313 Line Access Mode Line Ringing #612 Contact Closure Group
#314 Pool Extension Assignment Automatic Line Selection
#315 Pool Access Restriction Line Ringing
#316 Call Waiting
To Next Page
Loading...
Need help?
General
