Feature Reference
5-62
To change the Call Waiting setting for an extension:
1. Press
f 0 0 s s # 3 1 6 at extension
10 or 11.
2. Enter the number of the extension to receive Call Waiting. For example, to
program extension 11, press
1 1.
3. To assign or unassign Call Waiting, press
D until the appropriate
value displays.
4. To program another extension, press
n or p until the
extension number shows on the display. Then repeat Step 3.
5. Select another procedure or exit programming mode.
To Next Page
Loading...
