Lucent Technologies PARTNER Advanced Communications System User Manual

Feature Reference
5-86
3. At the
Extension:
prompt, enter the number of the extension to be
programmed. For example, to select extension 31, dial
3 1.
4. To assign or unassign the extension, press
D until the appropriate
value displays.
5. At this point:
■ To program another extension, press n or p until the
extension number shows on the display. Repeat Step 4.
■ To program another group, press N or P and
repeat Steps 2 through 4.
6. Select another procedure or exit programming mode.

Lucent Technologies PARTNER Advanced Communications System Specifications

General

Brand	Lucent Technologies
Model	PARTNER Advanced Communications System
Category	Conference System
Language	English