Lucent Technologies PARTNER Advanced Communications System User Manual

Feature Reference
5-122
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a Do Not Disturb button:
1. Press
f 0 0 s s c at extension
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button with lights.
4. Press
f 0 1.
5. Program another button for this extension or exit programming mode.
Using
From a system phone, press the programmed button to turn Do Not Disturb on;
press it again to turn it off. Use the button like a switch—when the light is on, Do
Not Disturb is on.

Lucent Technologies PARTNER Advanced Communications System Specifications

General

Brand	Lucent Technologies
Model	PARTNER Advanced Communications System
Category	Conference System
Language	English