Lucent Technologies PARTNER Advanced Communications System User Manual

Doorphone Extension (#604 and #605)
5-125
Valid Entries
Any extensions except 10, 11, or the first two extensions of any 206 or 308EC
modules.
None Assigned
✔
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To program a doorphone extension:
1. Press
f 0 0 s s # 6 0 4 for
doorphone 1 (or
# 6 0 5 for doorphone 2) at extension 10 or 11 .
2. Enter the doorphone extension number. For example, to identify extension
20 as a doorphone extension, press
2 0—or press r to unassign
an existing doorphone extension.
3. Select another procedure or exit programming mode.

Lucent Technologies PARTNER Advanced Communications System Specifications

General

Brand	Lucent Technologies
Model	PARTNER Advanced Communications System
Category	Conference System
Language	English