Lucent Technologies PARTNER Advanced Communications System User Manual

Music-on-Hold (#602)
5-195
Valid Entries
1 = Active ✔
2 = Not Active
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
as
s and e on system phones.)
To change the setting of the Music-on-Hold jack:
1. Press
f 0 0 s s # 6 0 2 at extension
10 or 11.
2. To activate or deactivate the Music-on-Hold jack, press
D until the
appropriate value displays.
3. Select another procedure or exit programming mode.

Lucent Technologies PARTNER Advanced Communications System Specifications

General

Brand	Lucent Technologies
Model	PARTNER Advanced Communications System
Category	Conference System
Language	English