LulzBot Mini 2 User Manual

29
Alloy 910 Nylon
If you’re looking for a highly durable filament, this nylon blend is one of the toughest filaments
available! Developed by Taulman to provide a material with a high tensile strength and
durability, this material is ideal for industrial applications. Its minimal shrink nature and
excellent surface bonding properties make this an easy filament to use, and at an affordable
price, easily obtainable too! Use Alloy 910 for frames or enclosures subject to stress and high
impact, and items subject to repeated flexing such as buckles and clasps.
Alloy 910 is chemically resistant to alcohols, resins, MEK, oils, acetones, most alkaline
substances, and most two-part casting compounds. Color can also be added with most
common clothing dyes. Printed parts are heat-resistant up to 93°C (200°F), making it an ideal
choice for high-demand environments. A light coating of PVA-based glue stick on the print
surface prior to printing with Alloy 910 is recommended for improved bed adhesion.
Extrusion Temperature: 235°C
PEI Print Surface Temperature: 100°C
Part Removal: 60°C
Tips: Treat PEI Print Surface with PVA Glue
Stick.
Tips: Enclosure Recommended.

LulzBot Mini 2 Specifications

General

Filament Diameter	2.85 mm
Nozzle Diameter	0.5 mm
Print Speed	Up to 275 mm/s
Connectivity	USB, SD Card
Software	Cura LulzBot Edition
Operating System Compatibility	Windows, macOS, Linux
Build Volume	160 mm x 160 mm x 180 mm
Layer Resolution	0.05 mm - 0.4 mm
Supported Materials	PLA, ABS, TPU, Nylon
Print Surface	Heated borosilicate glass/PEI
Bed Leveling	Automatic
Power Requirements	100 - 240 VAC
Printer Dimensions	340mm x 385mm