36
Laybrick
Give your custom designs a timeless quality by printing them with Laybrick stone filament.
Architectural models, organic shapes, and replicas print well due to the near-zero warping.
Paint, sand or grind the model or even vary the print temperature to achieve a smooth finish or
a rough texture. Due to the mineral content of Laybrick filament, we strongly recommend using
a LulzBot Tool Head with a 0.5mm nozzle for optimal 3D printing performance.
Extrusion Temperature: 190°C
PEI Print Surface Temperature: 60°C
Part Removal: 50°C
Laywoo-D3
LayWood combines recycled wood fibers with PLA for natural-looking, lightweight 3D Prints.
Different printing temperatures yield different color results: printing with hotter nozzle
temperatures will produce a darker color. This material also responds well to sanding for a
smooth finish. LayWood is primarily favored for its aesthetic properties; it is not recommended
for printed objects requiring a high degree of durability. Due to the blended nature of this
filament, we strongly recommend using a LulzBot Tool Head with a 0.5mm nozzle for optimal
3D printing performance.
Extrusion Temperature: 190°C
PEI Print Surface Temperature: 60°C
Part Removal: 50°C
To Next Page
Loading...
