LumaSense IS 12 - Page 4

IS 12 / IGA 12 Manual Contents • iv
5 Parameter Descriptions / Settings ................................................................................. 27
5.1 Emissivity ε.............................................................................................................. 27
5.2 Exposure Time (t
90
) ................................................................................................. 27
5.3 Clear time of the maximum / minimum value storage (t
CL
)............................... 28
5.4 FROM / TO (beginning and end of sub range) ...................................................... 29
5.5 Analog Output ........................................................................................................ 29
5.6 SETP (limit contacts) ............................................................................................... 29
5.7 Temperature display in °C or °F ............................................................................. 29
5.8 Digital Interface (RS) .............................................................................................. 29
5.9 Address .................................................................................................................... 29
5.10 Baud Rate (kBaud) .................................................................................................. 29
5.11 Test Current Output (10 mA) ................................................................................. 30
5.12 Wait Time ................................................................................................................. 30
5.13 Switch Contact ........................................................................................................ 30
6 Software InfraWin ........................................................................................................... 31
6.1 Connecting the pyrometer to a PC ....................................................................... 31
6.2 Installation .............................................................................................................. 31
6.3 Program start .......................................................................................................... 31
7 Maintenance .................................................................................................................... 33
7.1 Cleaning the front window ................................................................................... 33
7.2 Changing of optics ................................................................................................. 33
7.2.1 Fixed optics replacement ....................................................................................... 33
7.2.2 Focusable optics replacement ............................................................................... 34
8 Troubleshooting .............................................................................................................. 35
9 Data Format UPP (Universal Pyrometer Protocol) ....................................................... 37
10 Reference Numbers ......................................................................................................... 39
10.1 Reference numbers instrument ............................................................................ 39
10.2 Reference numbers accessories ............................................................................ 39
Index ....................................................................................................................................... 41