Lumel ND20 User Manual

61
Err L2 L3
error of phase sequence, one must interchange the
connection of phase 2 and phase 3. One can disable
the message by the
push-button. Each time you
power up, the message will be displayed again.
____or _____
- lower overflow. The measured value is smaller than
the lower measuring quantity range.
----
or
-----
- upper overflow. The measured value is higher than
the upper measuring quantity range or measurement
error.

Lumel ND20 Specifications

General

Brand	Lumel
Model	ND20
Category	Measuring Instruments
Language	English