35
7. UPDATING OF SOFTWARE
Function enabling updating of software from the computer of the PC with
software LPCon was implementation in meter ND20 (from software version
1.09). Free software LPCon and update files are accessible on the site
www.lumel.com.pl. The connected to the computer converter RS485 is
required on USB to the updating, e.g.: the converter PD10.
a)
b)
Fig. 13. Program view: a) LPCon, b) updating of software
Note! After updating the software, the manufacturer’s settings of the
meter should be set, so it is recommended to save the meter parameters
before updating using the software LPCon.
To Next Page
Loading...
Need help?
General
