Lumex SELECT Series User Manual

LS200-INS-LAB-RevB17 18
9 SPECIFICATIONS
MATTRESS
Model Description Specication
LS200M Dimensions (L x W x H) 80 in. x 36 in. x 8 in. (203.2 cm x 91.4 cm x 20.3 cm)
Weight 20 lb (9.1 kg)
Top Cover Material Navy Nylon coated with PU + Single Quilting
Bottom Cover Material Black polyester laminated with PVC
PUMP
Model Description Specication
LS200P Dimensions (L x W x H) 10.16 in. x 4.6 in. x 6.38 in. (25.8 cm x 11.7 cm x 16.2 cm)
Weight 4.85 lb. (2.2 kg)
Cycle Time 12 min. (4 min. A Deate, 2 min. STATIC, 4 min. B Deate,
2 min. STATIC)
Flow Rate (direct from pump) 4.5L / min. compressor
Pressure 16~32 (± 6) mmHg
Rated Voltage & Frequency AC 110-120V 60 Hz
Fuse Rating T1AL 250V
Maximum Current 0.1A
Classication (Electrical) Class II, Type BF
Not AP or AGP type
Temperature Operation 59°F ~ 104°F (15°C ~ 40°C)
Storage / Transport 41°F ~ 140°F (5°C ~ 60°C)
RH (Relative
Humidity)
Operation 30% ~ 75%
Storage / Transport 30% ~ 75%
Operation Atmospheric Pressure Range 700 hPa to 1060 hPa
Operation Altitude -1017 feet to 9,843 feet (-310 meters to 3000 meters)
Mode of Operation Continuous
Standard IEC 60601-1, CAN / CSA C22.2 No. 601.1, IEC 60601-1-2
Expected Service Life Three years
SYMBOL DEFINITION
Symbol Meaning
Type BF Protection against
electronic shock
Refer To Instruction Manual /
Booklet
Caution, consult accompanying
documents
Keep dry
Symbol Meaning
Class II equipment
Waste disposal
Alternating current
SGS product certication mark

Lumex SELECT Series Specifications

General

Brand	Lumex
Model	SELECT Series
Category	Medical Equipment
Language	English