EasyManua.ls Logo

lumishore EOS Mini User Manual

lumishore EOS Mini
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EOS MINI / EOS MINI WIFI
The Lumishore Color Change system takes the concept of marine underwater lighting installations to new
levels of brightness, color and underwater experience. The innovative EOS Mini / EOS Mini WiFi allows the
boat owner to achieve unrivalled levels of color options and lighting modes over the full color spectrum.
The Color Controller allows you to choose and easily adjust your light color, and by scrolling through the
various inbuilt lighting modes, you can select from a number of predefined colors, color cycle sequences. The
Controller also incorporates fish attraction modes with variable strobe rates to enhance your fishing trip or sea
life observation requirements.
Color cycles and color sweeps bring dynamic moving light scenes to the boat. The EOS Mini WiFi controller has
built in WiFi. This allows you to control your lights from your iPhone or iPad using the Lumishore App, which
mimics the controller on you mobile device.
For the ultimate party boat, The EOS Mini Controller has built in sound to light capabilities. The lights can be
setup to synchronise their color change with the beat and frequency of your favourite music.
Note: Refer to the relevant light installation instructions for how to install the lights onto your boat, and how
to connect the system together.
PN: 45 0050 Rev 2
Question and Answer IconNeed help?

Do you have a question about the lumishore EOS Mini and is the answer not in the manual?

lumishore EOS Mini Specifications

General IconGeneral
Waterproof RatingIP68
Typical LED Life50, 000+ hours
Supply Voltage12/24V DC
Warranty2 Years
TypeUnderwater Light
ControlDMX
Housing MaterialMarine Grade Bronze
Lens MaterialBorosilicate
Beam Angle60°
Operating Temperature-20°C to +40°C
LED TypeHigh-Power LEDs

Summary

Controller Installation

Mechanical Installation Procedure

Step-by-step guide for physically mounting the controller, including clearance and panel prep.

Electrical Installation and Connectivity

DMX Data Cable Connection

Details connecting the controller to Lumi-Hubs using DMX cables and terminators.

Controller Operation and Interface

Controller Button Functions

Details the function of each button on the EOS controller interface for navigation and control.

Initial Light Setup

Light Setup Procedure

Initiating Light Setup

Steps to enter light setup mode, discover connected lights, and check detection.

Assigning Light Positions

Guides on assigning physical positions to detected lights and saving the configuration.

Controller Options and Settings

WiFi Setup

Enables viewing or changing the controller's WiFi network name (SSID) and password.

iPhone/iPad Pairing Guide

Pre-Pairing Setup

Notes the SSID/Key and selects WiFi mode on the controller for pairing.

Connecting to WiFi Network

Guides the user to search for the controller's WiFi network and connect the device.

Configure IP Settings

Details configuring IP address, subnet mask, and router settings for a successful connection.

Lumishore EOS App Control