To Next PageTo Next Page
Need help?Do you have a question about the Lust CD 007.2 and is the answer not in the manual?
Highlights sections requiring special attention to prevent damage.
Essential safety instructions for operating electrical equipment.
Detailed description of how the amplifier modules operate.
Regulations and requirements for electrical installation.
Instructions for connecting the unit to the mains power supply.
Information on the DC link voltage and connections.
DC link voltage and connection details for CD_.2 series.
Guidelines for connecting the motor to the amplifier.
Information on connecting the 24V DC regulator supply.
Detailed explanation of parameter sets and their functions.
Parameters for configuring motor characteristics like pole pairs and type.
Configuration of setpoint channels and sources.
Parameters for optimizing the internal control loops.
Detailed steps for commissioning the unit, including checks.
Inputting motor parameters like pole pairs, type, and voltage constant.
Inputting parameters for current, speed, and flux regulators.
Switching enable signals for output stage, regulator, and HLA.
Final step of optimizing drive parameters for performance.
Explanation of LED indicators for fault signals.
Detailed list of possible faults and their remedies.
Reading fault messages from the BZZ terminal.
First part of the parameter list, covering device and motor data.
Second part of the parameter list, covering setpoints and basic unit settings.
Third part of the parameter list, detailing regulator and speed parameters.
Fourth part of the parameter list, covering communication and other settings.
General