Lust CDD34.003-HF - Technical Specifications

A-2
CDD3000-HF Operation Manual
A.1 Technical data
CDD32.003-HF to CDD34.006-HF
1)
Data referred to output voltage 230 V/400 V
and switching frequency 8 kHz
Designation
Technical data
CDD32.003-HF CDD32.004-HF CDD32.006-HF CDD32.008-HF CDD34.003-HF CDD34.005-HF CDD34.006-HF
Output, motor end
1)
Device rated power 1.0 kVA 1.6 kVA 2.2 kVA 2.8 kVA 1.5 kVA 2.8 kVA 3.9 kVA
voltage 3 x 0 ... 230 V 3 x 0 ... 400/460 V
Continuous current (RMS) (I
N
)
2.4 A 4.0 A 5.5 A 7.1 A 2.2 A 4.1 A 5.7 A
Peak current 1.8 x I
N
for 30 s
4.3 A 7.2 A 9.9 A 12.8 A 4.0 A 7.4 A 10.3 A
Rotating field frequency 0 ... 1600 Hz
Switching frequency of power stage 4, 8, 12, 16 kHz
Input, mains side
Mains voltage
1 x 230 V
-20 % +15 %
3 x 400 V / 3 x 460 V
-25 % +10 %
Current (with line choke) 4.4 A 7.3 A 10.0 A 12.9 A 2.3 A 4.3 A 6.0 A
Asymmetry of mains voltage – ±3 % max.
Frequency 50/60 Hz ±10 % 50/60 Hz ±10 %
Power loss at 4 / 8.16 kHz [W] 49 / 52 63 / 70 90 / 97 110 / 120 70 / 85 95 / 127 121 / 163
Braking chopper power electronics
Peak braking power with int.
braking resistor (only with version
CDD34 ..., Wx.x, BR)
--––
1.6 kW
at 360
Ω
Minimum ohmic resistance of an
externally installed braking resistor
100
Ω 56 Ω 180 Ω