Lutron Electronics CD-4318SD - 7 Other Function; Data Hold; Record ( Max.; Min. Reading )

7. OTHER FUNCTION
7-1 Data Hold
During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
7-2 Data Record ( Max., Min. reading )
1) The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4, Fig.
1 ) once to start the Data Record function and there
will be a " REC. " symbol on the display.
2) With the " REC. " symbol on the display :
a)
Press the " REC Button " ( 3-4, Fig. 1 ) once, the
" REC. MAX. " symbol and the maximum value
will appear on the display.
b)
Press the " REC Button " ( 3-4, Fig. 1 ) again, the
" REC. MIN. " symbol and the minimum value
will appear on the display.
b)
Press the " REC Button " ( 3-4, Fig. 1 ) again, the
" REC. " symbol and the REC value will appear
on the display.
c)
To exit the memory record function, just press the
" REC " button for 2 seconds at least. The display will
revert to the current reading.
13