EasyManua.ls Logo

Lutron Electronics CD-4318SD - 2 Specifications; General Specifications

Lutron Electronics CD-4318SD
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. SPECIFICATIONS
2-1 General Specifications
Circuit Custom one-chip of microprocessor LSI
circuit.
Display LCD size : 52 mm x 38 mm
LCD with green backlight ( ON/OFF ).
Measurement * Conductivity ( uS, mS )
Function * TDS ( Total Dissolved Solids, PPM )
* Salt ( % Weight )
* Temperature ( ,)
Temperature Automatic from 0 to 60 (32 - 140 ),
Compensation with temperature compensation factor
variable between 0 to 5.0% per C.
Conductivity Pt glass electrode for long life. Hight performance
Probe for the low conductivity ( pure water ) measurement.
Datalogger Auto 1 sec to 3600 sec.
Sampling Time @ Sampling time can set to 1 second,
Setting range but memory data may loss.
Manual Push the data logger button
once will save data one time.
@ Set the sampling time to
0 second.
@ Manual mode, can also select the
1 to 99 position ( Location ) no.
Memory Card SD memory card. 1 GB to 16 GB.
Advanced * Set clock time (Year/Month/Date,Hour/Minute/ Second )
setting * Set sampling time
* Auto power OFF management
* Set beep Sound ON/OFF
* Decimal point of SD card setting
* SD memory card Format
* Set temperature unit to or
* Set CD temperature compensation factor
* Set probe CELL K Value
Data Hold Freeze the display reading.
Memory Recall Maximum & Minimum value.
2

Related product manuals