Page 11
Sivoia® QS
|
Wiring and Programming Guide
8
Verify Communication
Press and hold Close ( ) for 5 seconds,
Press and hold Close ( ) to exit Link Diagnostics Mode.
8.1
8.3
Tap Open, hold Open 5 seconds., tap Open, hold Open 5 seconds.
- All window treaments will wiggle*
8.4
Press and hold Open 5 sec. to exit Link Diagnostics mode
8.5
(*) If any window treament is not wiggling, or is displaying a red LED, check the wiring
From a Drive:
Tap CCW ( ) to enter Link Diagnostics mode
-Window treaments will wiggle and display a
green LED, flashing once per second*
8.2
From the Sivoia QS Smart Panel:
Sivoia QS
120 V~
60 Hz
H
T
H
T, H, T, H
H
To Next Page
Loading...
