Lutron Electronics WAC-2019SD - 9 Other Function; Data Hold; Record ( Max.; Min. Reading )

9. OTHER FUNCTION
9-1 Data Hold
During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
9-2 Data Record ( Max., Min. reading )
1) The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4, Fig.
1 ) once to start the Data Record function and there
will be a " REC " symbol on the display.
2) With the " REC " symbol on the display :
a) Press the " REC Button " ( 3-4, Fig. 1 ) once, the
" REC MAX " symbol along with the maximum value
will appear on the display.
b) Press the " REC Button " ( 3-4, Fig. 1 ) again, the
" REC MIN " symbol along with the minimum value
will appear on the display.
c)
Press the " REC Button " ( 3-4, Fig. 1 ) again, the " MIN "
symbol, will be appeared, LCD only show the " REC "
symbol. the meter start the Data Record finction again.
d) To exit the memory record function, just press the
" REC " button for 2 seconds at least. The display will
revert to the current reading.
31