12. ADVANCED SETTING
Under do not execute the Datalogger function,
press the " SET Button " ( 3-8, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the " SET Button " ( 3-8, Fig. 1 ) once a while
in sequence to select the eight main function, the
display will show :
SD FORMAT SD memory card Format
CLOCK TIME Set clock time ( Year/Month/Date, Hour/
Minute/Second )
SAMPLE TIME Set sampling time (Second )
AUTO POWER OFF Auto power OFF management
BEEPER SOUND Set beeper sound ON/OFF
DECIMAL POINT Set SD card Decimal character
TEMPRATURE UNIT
Select the Temp. unit to ℃ or ℉
DO SALT % COMP. Set DO salt% compensation, DO only
DO Hight (meter) COMP. Set DO height (meter) compensation, DO only
DO Hight (feet)COMP. Set DO height (feet) compensation, DO only
CD Temprature COMP. Set CD temperature compensation factor.
PH Manual Temp, COMP. Set pH manual Temp. compensation value.
ESCAPE SETTING
Escape from the advanced setting
Remark :
a. DO - Dissolved oxygen Mode
CD - Conductivity/TDS Mode
pH - pH/mV Mode
b. During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
39
To Next Page
Loading...
