9-3 LCD brightness select
Depending on the brightness of the environment,
can use the "Backlight Button " ( 3-2, Fig. 1 ) select from 3rd-order
LCD Backlight brightness.
10. DATALOGGER
10-1 Preparation before execute datalogger function
a. Insert the SD card
Prepare a " SD memory card " ( 1 GB to 16 GB, optional ),insert
the SD card into the " SD card socket " ( 3-20, Fig. 1).The front
panel of the SD card should face against the down case.
b. SD card Format
If SD card just the first time use into the meter, it recommend to make
the " SD card Format " at first. ,please refer chapter 12-1, page 40.
c. Time setting
If the meter is used at first time, it should to adjust the
clock time exactly, please refer chapter 12-2, page 40.
d. Decimal format setting
The numerical data structure of SD card is
default used the " . " as the decimal, for
example "20.6" "1000.53" . But in certain
countries ( Europe ...) is used the " , " as the
decimal point, for example " 20, 6 "
"1000,53". Under such situation, it should
change the Decimal character at first, details
of setting the Decimal point, refer to Chapter
12-6, page 43.
32
To Next Page
Loading...
