Lutron Electronics WAC-2019SD - Electrical Specifications

Optional * PH electrode.......................
Accessories PE-03, PE-11, PE-01, PE06HDA,
PE-04HD, PE-03K7
* ATC probe ( Automatic Temperature
Probe )........................................ TP-07
* pH 7 buffer solution................. PH-07
* pH 4 buffer solution..................... PH-04
* Conductivity/TDS probe,
Salt probe............................ CDPB-03
* 1.413 mS Conductivity Standard
Solution................................ CD-14
*
Oxygen probe..........................................
OXPB-11
* Spare Probe head with Diaphragm set
.........................................................
OXHD-04
*
Probe-filling Electrolyte....................
OXEL-03
* ORP Electrode........................... ORP-14
SD memory card ( 4 GB )
AC to DC 9V adapter.
USB cable, USB-01.
RS232 cable, UPCB-02.
Data Acquisition software,SW-U801-WIN.
2-2 Electrical Specifications (23±5 ℃ )
A. PH/mV
PH
Optional,
Electrode
Any PH electrode with BNC connector.
Measurement PH 0 to 14 PH
mV -1999 mV to 1999 mV
Input 10^12 ohm
Impedance
Temperature Manual 0 to 100 ℃, be adjusted by
Compensation push button on front panel.
for pH Automatic With the optional temperature
measurement ( ATC )
probe ( TP-07 ) 0 to 65 ℃.
5