Lutron Electronics WAC-2019SD - Page 42

12-1 SD memory card Format
When the " SD FORMAT " text is yellow color
1)
Press "Enter" into the setting function,then use the "
▲
Button
" ( 3-5, Fig. 1 ) or "
▼
Button " (3-6, Fig. 1 ) to select the
upper value to " Yes " or " No ".
Yes - Intend to format the SD memory card
No - Not execute the SD memory card format
2) If select the upper to " Yes ", press the " Enter Button
" ( 3-4, Fig. 1 ) once again, the Display will show text
" Enter " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
12-2 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the " CLOCK TIME " text is yellow color
1)
Press "Enter" into the setting function,then use the "
▲
Button
" ( 3-5, Fig. 1 ) or "
▼
Button " ( 3-6, Fig. 1 ) to adjust the
value ( Setting start from Year value ). After the desired value
is set, press the " Enter Button " ( 3-4, Fig. 1 ) once will going
to next value adjustment ( for example, first setting
value is Year then next to adjust Month, Date, Hour,
Minute, Second value ).
Remark :
The adjusted value will be flashed.
40