Batteries
- Charge the battery of the parent unit for some hours until it’s fully charged. The battery is
fully loaded when the charging light colours green.
- We advise you always to use the main power for the baby unit. Should there be no main
power around, we advise you to use non-rechargable batteries for the baby unit. Should you
decide to use batteries, make sure that the power adapter is not connected to the camera.
The baby unit has no charging function for rechargable batteries.
- To avoid damage to the batteries, please do not expose the baby monitor to temperatures
higher than 40°C. Please remove the optional batteries from the baby unit if you do not use
the product for more than 1 month.
CONTENS OF PACKAGE
The system includes the following components:
- 1 x baby unit (camera)
- 1 x parent unit (monitor)
- 1 x power adapter for the parent unit
- 1 x power adapter for the baby unit
- 1 x RCA cable for connecting the parent unit to the television
- 1 x wall plugs and screws
Check your package to conrm that you have recieved the complete system, including all com-
ponents listed above.
Baby unit
Power adapters
(parent unit & baby unit)
Screws
& Plugs
RCA cable
Parent unit
To Next Page
Loading...
