Note: The minimum temperature difference value
between ST1 and SP1 is 0.3℃/0.5℉. When both values of
ST1 and SP1 are larger than or equal to 100℉, the
minimum temperature difference value is 1.0℉.
Short press or to adjust the setting values, hold
， or to adjust the setting values quickly.
The controller will save the settings and exit automati-
cally if there's no operation in 60 seconds, or you can
hold for 2 seconds to exit settings manually.
When the current temperature of P1 is greater than or
equal to the stop heating temperature of P1, WORK1 will
turn off the output and the heating symbol will go out.
Hold for 2 seconds and press once again to
enter the setting menu, then select SP1.
Stop Heating Temperature of P1(SP1)
-8-
To Next Page
Loading...