Short press or to adjust the setting values, hold
， or to adjust the setting values quickly.
The controller will save the settings and exit automati-
cally if there’s no operation in 60 seconds, or you can
hold for 2 seconds to exit settings manually.
The current temperature of P2 is 74.3℉. After setting
CA1 (the temperature calibration value of P1) to 0.3℉,
the current temperature displays 74.6℉.
Hold for 2 seconds and press once again to enter
the setting menu, then select ST2.
Short press or to adjust the setting values,
hold or to adjust the setting values quickly.
Start Heating Temperature of P2(ST2)
-11-
To Next Page
Loading...