Press again, the P2 SET TEMP. area will display
the start heating temperature 80.0℉.
Press , the P1 SET TEMP. area will display the start
heating temperature 77.0℉.
The controller will return to normal display if there’s no
operation for 3 seconds, or you can press any button to
return to normal display manually.
For example, the start heating temperature of P1 is 77.0°F
and the stop heating temperature is 78.0°F; the start
heating temperature of P2 is 80.0°F, and the stop heating
temperature of P2 is 82.0°F. The device displays the stop
heating temperature of P1 and P2 by default.
Quick Query of The Start
Heating Temperature
-4-
To Next Page
Loading...