Hold for 2 seconds and press once again to
enter the setting menu, then select CA2.
Short press or to adjust the setting values, hold
， or to adjust the setting values quickly.
The controller will save the settings and exit automati-
cally if there's no operation in 60 seconds, or you can
hold for 2 seconds to exit settings manually.
The current temperature of P2 is 74.5℉. After setting
CA2 (the temperature calibration value of P2) to -0.3℉,
the current temperature displays 74.2℉.
Hold for 2 seconds and press once again to
enter the setting menu, then select ALM.
Users can choose whether to turn on the buzzer sound
when the abnormal alarm is triggered according to their
actual usage. If ON is selected, the buzzer will sound
when the abnormal alarm is triggered; if OFF is selected,
then the buzzer will not sound.
The Setting of The P2 Calibration Value(CA2)
Turn On/Off The Buzzer Sound Manually(ALM)
-15-
To Next Page
Loading...