Hold for 2 seconds and press once again to
enter the setting menu, then select AH1.
High Temperature Alarm of P1(AH1)
Hold for 2 seconds and press once again to
enter the setting menu, then select AL1.
Short press or to adjust the setting values,
hold or to adjust the setting values quickly. For
example 84.0℉
The controller will save the settings and exit automati-
cally if there's no operation in 60 seconds, or you can
hold for 2 seconds to exit settings manually.
When the current temperature of P1 is greater than or
equal to the high temperature alarm set value of P1, the
high temperature alarm will be triggered, and AH will be
displayed alternately with the current temperature.
Note: If ALM = ON, the buzzer will sound Bi-Bi-Biii when
the high temperature alarm is triggered, and it will stop
when the temperature returns to normal. You can also
press any button to manually cancel the alarm.
Low Temperature Alarm of P1(AL1)
-9-
To Next Page
Loading...