To Next PageTo Next Page
Need help?Do you have a question about the Luxul XMS-1010P and is the answer not in the manual?
General| Total Network Ports | 10 |
|---|---|
| Gigabit Ports | 8 |
| PoE+ Ports | 8 |
| SFP Ports | 2 |
| PoE Power Budget | 130W |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame Support | 9KB |
| Power Input | 100-240VAC, 50/60Hz |
| VLANs | Up to 256 |
| QoS | Yes |
| Managed | Yes |
| PoE Standard | 802.3af/at |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
Explains graphical alerts (NOTE, CAUTION, WARNING) for important information and special requirements.
Details the front panel components, ports, and LEDs of the XMS-1010P switch.
Describes the functionality of each LED indicator on the switch for status monitoring.
Instructions on how to use the reset button for factory default restoration.
Lists requirements for cables, computer, power, temperature, and humidity.
Essential checks and precautions before connecting the switch to the network.
Steps for placing the switch horizontally on a stable surface.
Guidance on mounting the switch in a 19-inch rack using L-brackets.
Details the default IP address, username, password, and steps to log in.
