Luxul XMS-1024P Quick Install Guide

Simply Connected
Use the XMS-1024P to:

Cost-effectively Add 802.3af/at PoE Capability to Your
Network

Deliver Power and Data for up to 24 PoE-Enabled Network
Devices with a Maximum Output of 320 Watts

Simplify PoE Device Installation, Including IP Sercurity
Cameras, VoIP Devices, and Wireless AP’s

Future Proof Your Network with Gigabit Speeds
(10X Performance of Fast Ethernet)

Optimize and Protect Your Network with Advanced
VLAN, QoS and Network Security Features
Quick Install Guide
XMS-1024P
24-Port Gigabit Ethernet
Managed PoE Switch

Luxul XMS-1024P Specifications

General

Ports	24
Power over Ethernet (PoE)	Yes
Total PoE Power Budget	370W
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	2
Port Speed	10/100/1000 Mbps
Form Factor	Rack-mountable
PoE Ports	24
PoE Standard	802.3af/at
MAC Address Table	8K
Jumbo Frame Support	9KB
Power Supply	Internal
Input Voltage	100-240VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Operating Temperature	0 to 40°C (32 to 104°F)