28
- Pull out the pressing pin on the left and right sides.
- Fit in the pressing pin by putting it into the left and side holes of the chin rest paper.
- Attach the chin rest paper where pressing pin was fit in, onto the slip.
[Chin rest paper]
5. Print paper attachment
Refer to “10.2 Replacing” part for print paper attachment sequence.
6. Setting confirmation
Check and select various functions related to measurement including VD value or printer conditions.
Print any message that you want to print along with the measurement data (refer to “9.5. User Setup
mode” part).
To Next Page
Loading...
Need help?
General