Need help?Do you have a question about the LX Navigation Colibri II and is the answer not in the manual?
General| Brand | LX Navigation |
|---|---|
| Model | Colibri II |
| Category | Avionics Display |
| Language | English |
Highly sensitive GPS receiver with built-in antenna for integral unit function.
Details internal battery, charging via USB/external power, and 10-hour autonomy.
Details the USB Mini B plug used for external power supply and unit communication.
Explains the integral micro SD card reader's function for data transfer operations.
Activates a thermal assistant showing thermal profile, average climb rate, and altitude gain.
Shows extended glider data including ID, distance, bearing, vario, and status.
Allows conversion of unique Flarm IDs to a usable 3-character form for easy identification.
Guides pilot through tasks, showing track, bearing, TP zone, and acoustic alerts.
Enables editing turn points, creating zone geometry, and configuring auto-next settings.
Provides flight statistics and logs flight details like takeoff, landing, and total time.
Sets QNH and altitude readings for accurate altimetry display.
Selects additional data (ENL, FXA, GSP) to be recorded in the IGC log.
Activates event marking in the IGC file for specific flight points or occurrences.
Covers switching the unit on/off and how flights are automatically started and stopped.
Describes using IGC shell and LXN.dll for verifying flight record integrity.
Lists compatible units and programs for data exchange with the Colibri II.
Provides clear instructions on turning the unit on and off correctly.
Explains using the interface to convert 12V glider power to 5V for the unit.
Details the pinout of the USB mini B connector for charging and data exchange.
Describes the interface converting 12V to 5V and serial communication levels.
Mentions an optional mounting frame designed for easy installation of the Colibri II.
Illustrates the connection diagram for linking the Flarm system to the Colibri II.
To Next Page
