Need help?Do you have a question about the LX Navigation LX Flarm Red Box and is the answer not in the manual?
General| Brand | LX Navigation |
|---|---|
| Model | LX Flarm Red Box |
| Category | Avionics Display |
| Language | English |
Details the components included in the Flarm Red Box and Flarm interface for LX 5000 packages.
Describes the functionality and indicators of the external display unit for the Flarm system.
Explains how to adjust display parameters like baudrate using the mode selector button.
Covers the process of adjusting Red Box settings, particularly baud rate, for communication.
Details cable setups required for connecting to a PC for firmware updates.
Outlines the procedure for updating the Flarm unit's firmware using PC software.
Provides guidance on selecting an optimal location for the external display unit.
Explains how to connect power to the Flarm Red Box and the LX 5000 interface.
Details the proper placement and orientation for the RF antenna for optimal performance.
Provides instructions for installing the GPS antenna to ensure good satellite contact.
Lists checks to perform after installation to ensure the unit is functioning correctly.
Describes the process of updating firmware and obstacle data via an SD card.
States that Flarm usage does not negate pilot responsibility for airspace monitoring.
Details features of units with IGC approved flight recorders, including labeling and event markers.
Explains how to declare flight tasks using the SD card and flarmcfg.txt file.
To Next Page
