Need help?Do you have a question about the LX Navigation LX160 and is the answer not in the manual?
General| Display Type | TFT LCD |
|---|---|
| GPS | Yes |
| Variometer | Yes |
| AHRS | Yes |
| Connectivity | Bluetooth |
| Interfaces | RS232 |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +70°C |
Set the wind component value in the selected units.
Configure the distance to the target point for calculations.
Set the target altitude for accurate final glide calculations.
Set or correct the aircraft's altitude (QFE or QNH).
Define the altitude reserve for final glide calculations.
Enable or disable NMEA sentence reception from GPS devices.
Access special functions and settings using a password.
Select from a database of 85 glider polar curves.
Set user-defined polar parameters (a,b,c) and wing load.
Choose between automatic or fixed wind component methods.
Configure display settings for up to four indicators.
Select between European, English, American, and Australian units.
Set the speed for switching between VARIO and SC modes.
Configure total energy compensation based on pneumatic connections.
Configure SC mode with no audio information in a specific area.
Adjust the time constant for calculating average vario values.
Enable or disable the PASS menu during flight.
Invert the external Speed Command (SC) input signal.
Displays the current battery voltage of the instrument.
Enable or disable output signals for WinPilot software integration.
Set different filter constants for the vario, measured in seconds.
Configure ballast settings for different positions of the BAL switch.
Set glide ratio degradation percentages for the Bugs function.
Explains how final glide path is calculated and provides examples.
Reset all settings to default values, useful for resolving issues.
Details the wiring for connecting the LX160 to WinPilot software.
Visual representation of the LX160's menu and function hierarchy.
Electrical wiring diagram for the LX160, including connectors.
Specifications for drilling mounting holes for the LX160.
Detailed listing of pin assignments for LX160 connectors.
Chronological record of software versions and their changes.
To Next Page
