LX160
21.09.06
Page 9
6. Power on
After powering up the LX160, wait app. 40 sec. to warm up the sensors. On the LCD
indicator we will see displayed LX160 and the number of version.
Figure 5 After power on
7. Two main working modes
The LX160 has two main modes: VARIO and SC (speed command) mode. In the vario mode
the needle displays vario, the upper number displays average. The lower number display is
decided by the user in the “INDIC” set-up menu.
Figure 6 Vario mode
In SC mode, the needle displays SC, other information is selected by the user, the same as
in the vario mode.
Program
version
To Next Page
Loading...
Need help?
General
