LX160
21.09.06
Page 12
8.3. TARG (target altitude)
In target menu we can set the altitude of the target. In case, that we have altitude on
altimeter (ALT), set on QFE, and we want to fly back to our home airport (same as take
off), TARG must stay on 0. If the altitude on the LX160 is set on QNH, we need to set the
altitude of target. In that case we can make a final glide to each point selected, if we know
it’s altitude.
Figure 10 Target altitude
8.4. ALT (altitude)
Menu for setting altitude on QFE, QNH before take off or for correcting altitude during flight.
It’s pilot decision what kind of altitude will be displayed (QFE or QNH).
Figure 11 Altitude set-up
To Next Page
Loading...
Need help?
General
