LX Navigation LX160 - LX160 FAQ

LX160
21.09.06
Page 24
10.3. FAQ - frequently asked questions
Q: Why does the LCD blink ?
Figure 37
A: Check indicator cable. Check, if LX160 works.
Q: LX160 can’t receive GPS data.
A: Check if GPS device is connected correctly. Check if GPS device transmits correct data
(GPGGA, GPRMC, GPRMB sentences)
Q: Vario in LX160 is very slow. SC doesn’t work properly.
A: Check if probes are connected properly
Q: What means that message?
Figure 38
A: Program data in eprom is damaged or socket for eprom is damaged. Insert new eprom or
check socket and pins on it.
Q: Can you tell me how to zero the vario?
A: In password menu enter:01049 and waituntil autozero procedure is finished.
Q: My glider is not on the polar list of LX160. How can I calculate aPolA,PolB and PolC
parameters?
A: Use LXpolar program in LXe. It's available on our web.